How to use FTP to upload Video & Images from NVR / DVR

1.You can use NVR FTP upload video file or image to FTP server or other storage device like NAS. Because FTP is a transfer protocol based on file, it will first make whole the file before the file been start transmitted. So you need to install a hard disk on you NVR. In addition, please check your FTP server limitation about file size, write file/folder authority, connection time.

1) NVR must install harddisk, because NVR first make the file and save on harddisk, then FTP client upload to server, Dropbox and email snapshot also need harddisk;

2) IP camera use ONVIF to connect NVR

3) Enable the channel motion detection and set the parameters on both IP Camera and NVR

4)  Enable motion detection record plan, because FTP is upload the video file on harddisk;

5) Enable FTP upload and set the correct setting

2.Setting FTP parameter:  

( * here introduce set FTP on NVR Webpage, you also can set it on NVR local GUI menu)

1)FTP upload video setting:

2)FTP upload alarm image setting:

 

3. Enable Motion Detection Alarm (both IP camera and NVR):  

 

NVR:

 

4. Enable Motion Record Plan:  

Notes: if you don’t need to upload alarm video, you don’t need to set this setting.

 

5. Checking FTP Server

All setting been correctly finished, please restart the NVR, if all setting are OK, when there is video motion alarm, NVR will upload video or images to FTP server, if you use FileZilla Server as FTP server, you will can see the uploading progress:

 

FTP upload images & video files:

If you have any question or need help, please contact with Sysvideo technical engineer.

Notes: 
1. You first install hard disk;
2. You must enable record and snapshot plan;
3. You must set FTP parameter corretly;
4. If you need to use motion alarm snapshot, the IP camera also need to enable motion alarm and support ONVIF snapshot.

Sysvideo launched 8 megapixel 4K Box IP camera with HDMI output

Sysvideo launched 8 megapixel 4K Box IP camera with HDMI output, it use Hisilicon new generation high performance image SoC processor Hi3519A + Sony 8MP image sensor, can output full real-time 8 megapixel 4K/Ultra HD video. Based on H.265 compression technology, offer high resolution and low bit rate video image, support HDMI output and SD card, USB storage, is suitable for government, bank,traffic, airport, medical device application.

Features:
● 1/1.7" 8 Megapixels Sony Progressive Scan high performance CMOS Sensor  
● 8 Megapixels 4096(H)x2160(V) 4K x 2K  25/30fps high definition
● Built-in IR-cut filter, support day/night auto switching
● G.726/G.711A/G.711U audio coding, input/output volume can been adjusted
● Support title, date, time, week, frames, bit rate, connecting number, etc. OSD
● Smart function: smart stream (ROI, 4 regions), smart alarm, smart low light
● H.265 H.265 Main Profile/H.264 Baseline/Main profile/High Profile & MJPEG dual-stream encoding
● Support WDR,BLC, AWB, AGC
● Support 4 privacy mask area setting
● Support video mirror, flip, rotation, LSC, CTB, WDR, 3D noise reduction setting
● IR switching mode: IR sensor detection, video detection, schedule switch
● Support anti Fogging and anti Trembling
● Can view and control the image via IE browser, CMS software and smart phone
● Support image stabilizer
● Support ONVIF & GB28181
● Support DDNS, PPPoE, DHCP,UPnP,SMTP,FTP,VPN, P2P, DDNS, VPN
● No lens
● Free central management software
● it is suitable for bank, traffic, government, medical equipment, etc. application.
● Support HDMI 1080P output
● Power Interface design with anti-error interpolation, to avoid false or backwards circuitry damage
● Built-in micro SD memory card (TF card) slot, supports up to 256GB
● Optional DC 12V / POE / AC 24V power supply

Specifications:

Model		SC5181-4K
Camera
Sensor		1/1.7” 8 Megapixel Sony CMOS
Main Processor		3519A
Sensor Pixels		4096(H)x2160(V), 8 Megapixel
System		Progressive scanning
Shutter Speed		1/25s~1/10000s; auto adjust
Illumination		Color: 0.05Lux@F1.2, B/W: 0.0001Lux@F1.2;
S/N Ratio		≥50dB(AGC OFF)
Day/Night		ICR, auto switch
Wide Dynamic Range:		>80dB
Noise Reduction		2D/3DNR
Privacy Mask		4 regions
Lens Interface		C/CS
IRIS		DC drive, support auto/manual/fixed iris lens
Video
Video Encoding:		H.265/H.264/MJPEG
Resolution	Main stream	4096*2160/3840*2160/1080P(1920*1080)/720P(1280*720),1-25/30fps
	Sub stream	D1(704×576)/VGA(640*480)/QVGA(320×240), 1-25/30fps
Frames		1 ~ 25fps(50HZ); 1 ~ 30fps(60HZ)
Bit rate		32KB ~16Mbps, support constant bit rate (CBR) or variable bit rate (VBR)
Image Setting		Image brightness, contrast, hue, saturation, sharpness, Gamma is adjustable; Support AWB ,AGC, AE, AIC;
OSD		title, date, time, week, frames, bit rate, connecting number. Can change the color and position
Image distortion		Flip, mirror, 90/270 degree rotation
Audio
Audio Encoding		G.711a/ G.711u/G.726
Audio Interfaces		1x3.5mm audio input & output, MIC IN/Line IN
Smart Functions
Smart Encoding		Support 4x ROI (region of interest ) regions enhance, support auto adjust the image quality and bit rate according to video motion.
Smart Detect		Smart Cover Detect, Smart Focus Detect
Smart Control		Smart alarm on/off, smart low light
Network
Interface		1x RJ45 10M/100M/1000M Ethernet
Protocol		IPv4, HTTP, TCP/IP, UDP, RTP, RTCP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP
Compatibility		Support ONVIF & GB28181, SDK
Connection Users		Max 8 users at same time
Mobile Monitoring		Support iPhone, iPad, Android, support P2P connection
Others
Local Video Output		1 channel HD output HDMI 1.4a 1 channel CVBS SD composite video output (BNC connector, 1.1Vp-p ± 10%, RL = 75Ω);
Local Storage		Support max 256GB Micro SD card ( TF card)
USB extend storage		Support max 64GB U disk
RS485		Support
Alarm input/output		2 x alarm input, Vin <= 0.3V; 1 x ON/Off alarm output, 1A / 125VAC, 1A / 30VDC
Reset button		Support
General
Housing		White, aluminum,
Power		DC 12V / AC 24V / POE(802.3af) is optional
Consumption		≤5W
Working Temperature		-10℃~55℃，20-80% RH (Non-condensing)
Dimension		(L)148mm×(W)78mm×(H)56mm (don’t include lens and mount)
Humidity		0.55kg (don’t include lens)
Installation		Ceiling / wall mount (need to add mount)